Seawater Desalination PlantOne Reverse Osmosis Sea Water Desalination Plant
Of Capacity 2000 m3/day
Type: One train
Membrane configuration: Spiral Wound
Nominal Capacity: 2000 m3/day potable water
Sea Water feed pressure: 4-1 bar
RO operation pressure: 65 bar
Sea Water feed supply: 186 m3/hour
Nominal conversion rate: 45 % = 83,5 m3/h potable water
Product water quality: 300 mg/l TDS Nominal
Absorbed total power: 400 kW included energy recovery
Absorbed power per m3 product water: 4,8 kWh / m3
Dimension of RO membrane skid mounted inside one 40' container, length of HP-pump w/motor 4000mm approx.
Location of HP-pump w/process equipment, mounted inside one 40' container, Weight of each 40' containers 15 tons each (two containers)
Sea-water feed will have to come from drilled and tested beach well in order to deliver high quality sea water exempted from suspended matters.
Necessary Civil Engineering to be arranged locally: One fresh water reservoir of 4000 m3 buried underground in concrete, drilling / testing of shore well with sea- water feed line, Sea-water brine line disposed back to sea. One concrete platform 10 x 18 m receiving the two containers, drawback tank, acid tank, re-mineralising tank and sand filter if necessary (depending of sea water quality from shore well). El-supply: 440V / 660V.
Warranties
One year general warranty for equipment and workmanship. Three years membrane performance warranty according membrane manufacturer's normal running conditions. (Membranes replacement rate: nominal every 3 year).
SALTY WATER DESALINATION PLANT
Offer:
SW Desalination Plant
Capacity
2000m³/day (84m³/hour)
Project
SWD Plant On a Turnkey Basis
Major elements included are:
Arrangement of:
SW intake strainers
Feed pumps
Brine outlet:
Primary Sand Filter
Secondary Sand Filter
Bag Filters
Cartridge Filters
Sizes:
Size of One Membrane Rack:
6.5m Long x 2m Width x 2.5m High
Size of HP pump with motor:
L 5m x W 1.5m-Weight 5 tons (one skid)
Size of energy recovery equipment on skid:
3m Long x 1.5m Width
The unit needs a 40m³ drawback tank (for membrane cleaning)
A fresh water production tank of 4000m³ is recommended enough for
2 days of production.
Power consumption: 280 Kw (including energy recovery equipment)
Power can be generated from separate Diesel Generator installed in one 40' container.
Estimated construction time:
8 months including installation
on board of a vessel or on land.
Please call for more details and competitive prices |
